MANNOL 2K-PUR is a two-component adhesive for structural and cosmetic repair of plastic parts, metal, wood, stone etc. Final curing occurs within 2-3 hours at room temperature. The adhesive sustains elasticity in the long term, does not form sediment, is weatherproof and resistant to ageing. Keep this product tightly closed in the original packaging in a dry place at temperatures from +5 to +25 °C.
In order to achieve an optimal adhesive result, the surfaces must be clean and free of grease. Some surfaces must be roughened. Squeeze adhesive out of the double syringe and stir well both components with an applicator. Apply the adhesive and bond the parts together (max. processing time 4-6 minutes). Hand-tight after approx. 8-10 minutes. Completely cured after 2-3 hours. Curing times are dependent on the room temperature. Do not use the product at temperatures below 0 °C. After use close the package with the cap again. Keep in a cool and dry place.
Product Characteristics:
| Characteristics | Method | Unit | Value |
| 01. Viscosity at -25 °C | N/mm2 | 0,015-0,020 | |
| 02. Mixing ratio | 1:1 | ||
| 03. Colour | gray/black | ||
| 04. Surface dry time | min | 4-6 | |
| 05. Specific weight | g/cm³ | 1,30 | |
| 06. Temperature resistance | °C | up to max. 150 | |
| 07. Final strength | h | 2-3 | |
| 08. Hardness Shore A | ASTM D 2240 | 78-80 | |
| 09. Shearing strength | N/mm2 | 3-5 | |
| 10. Thermal conductivity | W/m∙K | 0,1 | |
| 11. Thermal expansion coefficient | 1/K | 60 – 120 x 10E6 | |
| 12. Dielectric strength | kV/mm | 50-90 | |
| 13. Special resistance | Ohm∙cm | 3 – 5 x 10E12 |
